Unitech MS120 Barcode Scanner

The MS120 Series Barcode Wands are targeted toward low reading volume and cost effective solutions. The advanced optics and electronic design convert barcode labels into a high quality digital signal. Able to read color faded and low contrast barcodes quickly and accurately the MS120 is a proven solution. The polished sapphire tip reduces wear on labels and is also easily replaced if damaged. The MS120 is available with three different interfaces. The MS120A is an undecoded model which interfaces via a 9-Pin squeeze release connector. The MS120-2 has an RS-232 interface with a built-in decoder. With a key-board wedge (AT or PS/2) interface the MS120-3 also has a built-in decoder. It's shape gives the MS120 the comfort and handling of a normal ink pen. Just sweep the tip of the wand across the barcode in either direction and listen for the "good read" beep that lets you know the data has been successfully captured. It doesn't get any easier than that.

Discontinued - Need Assistance

See all options

Specs & Info
All Options

Durable, replaceable saphire tip
Easy to use and configure
High scan speed (5 ~ 200 cm/sec)
Keyboard wedge and RS-232 interfaces available
Low power consumption
Rugged, lightweight design
Wide read angle (0 ~ 45 degrees)

MS120 Specs (pdf)

Features:

Rugged, lightweight design.
Easy to use and configure.
Low power consumption.
Wide read angle (0 ~ 45°).
High scan speed (5 ~ 200 cm/sec).
Durable, replaceable saphire tip.
Keyboard wedge and RS232 interfaces available.
1 year warranty

The MS120 series bar code wands are targeted toward low reading volume and cost effective solutions. The advanced optics and electronic design convert bar code labels into a high quality digital signal. Able to read color, faded and low contrast bar codes quickly and accurately, the MS120 is a proven solution. The polished sapphire tip reduces wear on labels and is also easily replaced if damaged. The MS120 is available with three different interfaces. The MS120A is an undecoded model which interfaces via a 9pin squeeze release connector. The MS120-2 has an RS232 interface with a built in decoder. With a key-board wedge (AT or PS/2) interface the MS120-3 also has a built-in decoder. Its shape gives the MS120 the comfort and handling of a normal ink pen. Just sweep the tip of the wand across the bar code in either direction and listen for the "good read" beep that lets you know the data has been successfully captured. It doesn't get any easier than that.

Extended Details

Refine Your Options

Shop By

Scanner Capability

1D (3)

Ruggedness

General Purpose (6)

Scanner Type

Laser (3)

Included Features

Scanner Only (1)

Included Cables

Unitech MS120 Barcode Scanner
Part #: MS120 | SKU: 29619

MS120 Pen Scanner (Stainless Steel Wand, with DIN Connector)
Unitech MS120 Barcode Scanner
Part #: MS120AG-ST | SKU: 29620

MS120, Stainless Steel Wand, with 9 pin squeeze TTL Interface, 660nm red LED, 2 - 78.7 inches/sec scan rate
Unitech MS120 Barcode Scanner
Part #: MS120-2G | SKU: 253703

Wand Scanner, RS232 - (Power Adapter Sold Separately)

Recommended Accessories for Model: Unitech MS120 Barcode Scanner

Unitech MS100 Power Device
Part #: 101000-0150 | SKU: 4520

AC Adapter (110VAC to 5VDC) for the RS232 CCD Scanner

Price: $26.84
Unitech AS10 Accessory
Part #: MS201 | SKU: 4521

CCD STAND FOR 3" SCANNERS MS210, MS265, & OTHERS

Price: $25.77
Unitech Scanner Accessory
Part #: 5200-381680 | SKU: 23847

Unitech Mounting Plate - Steel
Unitech Scanner Accessory
Part #: 1010-900007G | SKU: 208565

Scanner Accessories, Power Adapter - (Power cord Sold Separately)
Unitech MS331 Accessory
Part #: 1550-201596 | SKU: 17103

Unitech Wand Emulation Interface Cable (Coiled) - RJ-50 Male - DB-9 Female - 4.49ft - Black