Regulatory Compliance and Safety Information for the Catalyst
2960 Switch
AC power cord
One RJ-45-to-DB-9 adapter cable
Four rubber feet for mounting the switch on a table
Two 19-inch rack-mounting brackets (also used for wall
mounting)
Six Phillips flat-head screws for attaching the brackets to the
switch
Four Phillips machine screws for attaching the brackets to a
rack
One cable guide and one black Phillips machine screw for
attaching the cable guide to one of the mounting brackets
One Redundant Power System (RPS) connector cover (for wall
mounting)
Two Phillips pan-head screws (for attaching the RPS cover)
Four Phillips truss-head screws (for wall-mounting
brackets)
Catalyst 2960G-24TC Ethernet Switch
Catalyst 2960 Switch Getting Started Guide
Regulatory Compliance and Safety Information for the Catalyst
2960 Switch
AC power cord
One RJ-45-to-DB-9 adapter cable
Four rubber feet for mounting the switch on a table
Two 19-inch rack-mounting brackets (also used for wall
mounting)
Six Phillips flat-head screws for attaching the brackets to the
switch
Four Phillips machine screws for attaching the brackets to a
rack
One cable guide and one black Phillips machine screw for
attaching the cable guide to one of the mounting brackets
One Redundant Power System (RPS) connector cover (for wall
mounting)
Two Phillips pan-head screws (for attaching the RPS cover)
Four Phillips truss-head screws (for wall-mounting
brackets)
Additional Information:
LAN Base Image installed
Each dual-purpose uplink port has one 10/100/1000 Ethernet port
and one SFP-based Gigabit Ethernet port, 1 port active.
Configurable up to 8000 MAC addresses
Configurable up to 255 IGMP groups
Superior Redundancy for Fault Backup
Integrated Cisco IOS Software Features for Bandwidth
Optimization
Granular Rate Limiting
Networkwide Security Features
Management & Protocols
Manageable:
Yes
Yes
Management:
MIB II
Syslog
RMON I,II
VLAN
QoS
DHCP
SNMP v1,v2c,v3
Cisco Network Assistant
CiscoWorks Support
Device manager
Cisco Express Setup
CiscoView application
Cisco Network Assistant Software
Advanced QoS
Trivial File Transfer Protocol (TFTP) reduces the cost of
administering software upgrades by downloading from a centralized
location
Network Timing Protocol (NTP) provides an accurate and
consistent timestamp to all intranet switches
Cisco IOS CLI support provides a common user interface and
command set with all Cisco routers and Cisco Catalyst desktop
switches
Cisco Service Assurance Agent (SAA) support facilitates
service-level management throughout the LAN
Switching Database Manager templates for security and QoS allow
administrators to easily adjust memory allocation to the desired
features based on deployment-specific requirements
VLAN trunks can be created from any port using standards-based
802.1q tagging
Up to 255 VLANs per switch or stack and up to 128 spanning-tree
instances per switch are supported.
Four thousand VLAN IDs are supported
Voice VLAN simplifies telephony installations by keeping voice
traffic on a separate VLAN for easier administration and
troubleshooting
Cisco VTP supports dynamic VLANs and dynamic trunk
configuration across all switches
SNMP v1, v2c, and v3 and Telnet interface support delivers
comprehensive in-band management, and a CLI-based management
console provides detailed out-of-band management
Cisco Discovery Protocol Versions 1 and 2 help enable a
CiscoWorks network-management station for automatic switch
discovery
Warranty
Limited Warranty:
3 Year
Lifetime
Additional Warranty Information:
Product does not ship from original manufacturer
Product may not be eligible for original manufacturer warranty,
rebates or programs
Direct replacement warranty provided by Ingram Micro (1 year
for components, 3 year for systems)
Product ships from IMSourcing facility within 2-3 days or from
stock
Product may ship in non-standard packaging
All returns processed directly from IMSourcing
Product condition subject to availability
Replacement parts are from our Service inventory and meet our
rigorous inspection and quality standards. Some will be new, some
are manufacturer certified refurbished, some are considered 'as
new' and have been tested, refurbished or remanufactured. All are
fully warranted
Where applicable, -IM indicates an Ingram Micro certified
pre-owned product