Product was successfully added to your shopping cart.

Cisco Catalyst 2960 Series Switch Data Networking
Part #: WS-C2960-24TT-L | SKU: 40629

Cisco Catalyst 2960 Series Intelligent Ethernet Switches enable entry-level enterprise, medium-sized, and branch office networks to provide enhanced LAN services. This family of fixed-configuration, standalone devices provide desktop 10/100 Fast Ethernet and 10/100/1000 Gigabit Ethernet connectivity.

Cisco Catalyst 2960 Series Switch Data Networking

Part Details: Catalyst 2960 Series Switch, Catalyst 2960 Switch (24 10-100+2 1000 Bluetooth LAN Base Image)

Need a different version of the Cisco Catalyst 2960 Series Switch Data Networking? View all 51 configurations

Additional Information

Manufacturer	No
Model Name	Catalyst 2960 Series Switch
Product Condition	No

Catalyst 2960 Series Switch Specs (pdf)

General Information

Product Type: Ethernet Switch
Product Series: 2960
Brand Name: Cisco
Manufacturer: Cisco Systems, Inc
Product Model: 2960-24TT
Product Name: Catalyst 2960-24TT Ethernet Switch
Product Line: Catalyst

Physical Characteristics

Height: 1.7"
Width: 17.5"
Depth: 9.3"
Weight (Approximate): 8 lb

Interfaces/Ports

Number of Network (RJ-45) Ports: 24
Total Number of Network Ports: 24
Port/Expansion Slot Details:
- 24 x Fast Ethernet Network
- 2 x Gigabit Ethernet Uplink
Uplink Port: Yes

Other

Package Contents:
- Catalyst 2960-24TT Ethernet Switch
- Catalyst 2960 Switch Getting Started Guide
- Regulatory Compliance and Safety Information for the Catalyst 2960 Switch
- AC power cord
- One RJ-45-to-DB-9 adapter cable
- Mounting kit containing
- Four rubber feet for mounting the switch on a table
- Two 19-inch rack-mounting brackets (also used for wall mounting)
- Six Phillips flat-head screws for attaching the brackets to the switch
- Four Phillips machine screws for attaching the brackets to a rack
- One cable guide and one black Phillips machine screw for attaching the cable guide to one of the mounting brackets
- One Redundant Power System (RPS) connector cover (for wall mounting)
- Two Phillips pan-head screws (for attaching the RPS cover)
- Four Phillips truss-head screws (for wall-mounting brackets)
- Catalyst 2960-24TT Ethernet Switch
- Catalyst 2960 Switch Getting Started Guide
- Regulatory Compliance and Safety Information for the Catalyst 2960 Switch
- AC power cord
- One RJ-45-to-DB-9 adapter cable
- Mounting kit containing
- Four rubber feet for mounting the switch on a table
- Two 19-inch rack-mounting brackets (also used for wall mounting)
- Six Phillips flat-head screws for attaching the brackets to the switch
- Four Phillips machine screws for attaching the brackets to a rack
- One cable guide and one black Phillips machine screw for attaching the cable guide to one of the mounting brackets
- One Redundant Power System (RPS) connector cover (for wall mounting)
- Two Phillips pan-head screws (for attaching the RPS cover)
- Four Phillips truss-head screws (for wall-mounting brackets)
Additional Information:
- 64 MB DRAM
- 32 MB flash memory
- LAN Base Image installed
- Configurable up to 8000 MAC addresses
- Configurable up to 255 IGMP groups
- Cisco Catalyst 2960-24TT: 282,416 hr
- Superior Redundancy for Fault Backup
- Integrated Cisco IOS Software Features for Bandwidth Optimization
- Advanced QoS
- Granular Rate Limiting
- Networkwide Security Features

Management & Protocols

Manageable: Yes
Management:
- Cisco Network Assistant
- CiscoWorks Support
- Device manager
- Cisco Express Setup
- CiscoView application
- Cisco Network Assistant Software
- Trivial File Transfer Protocol (TFTP) reduces the cost of administering software upgrades by downloading from a centralized location
- Network Timing Protocol (NTP) provides an accurate and consistent timestamp to all intranet switches
- Cisco IOS CLI support provides a common user interface and command set with all Cisco routers and Cisco Catalyst desktop switches
- Cisco Service Assurance Agent (SAA) support facilitates service-level management throughout the LAN
- Switching Database Manager templates for security and QoS allow administrators to easily adjust memory allocation to the desired features based on deployment-specific requirements
- VLAN trunks can be created from any port using standards-based 802.1q tagging
- Up to 255 VLANs per switch or stack and up to 128 spanning-tree instances per switch are supported.
- Four thousand VLAN IDs are supported
- Voice VLAN simplifies telephony installations by keeping voice traffic on a separate VLAN for easier administration and troubleshooting
- Cisco VTP supports dynamic VLANs and dynamic trunk configuration across all switches
- SNMP v1, v2c, and v3 and Telnet interface support delivers comprehensive in-band management, and a CLI-based management console provides detailed out-of-band management
- Cisco Discovery Protocol Versions 1 and 2 help enable a CiscoWorks network-management station for automatic switch discovery

Media & Performance

Ethernet Technology: Fast Ethernet
Media Type Supported: Twisted Pair
Network Technology:
- 10Base-T
- 10/100/1000Base-T
Twisted Pair Cable Standard: Category 5

Power Description

Input Voltage:
- 110 V AC
- 220 V AC
Redundant Power Supply: Yes
Power Source: Power Supply

Warranty

Limited Warranty: Lifetime

Network & Communication

Layer Supported: 2

Extended Details

Cisco Catalyst 2960 Series Switch Data Networking Part #: WS-C2960-24TT-L | SKU: 40629